Monitor support

• Installation guide
  • Installing the monitor
  • Operating the monitor
• Features
  • IPS panel
  • Voltage range
  • Dimming
  • Flush mounting
  • Wall mounting
  • Rack mounting
  • Connections
  • USB media player
• Troubleshooting
  • Color calibration
  • Unclear or blurry image
  • No fullscreen image
  • No signal message
• FAQ
  • Monitor in portrait mode
  • Cable length
  • Supported resolutions
  • Cleaning your screen

Installing the monitor

Before setting up the monitor, please read the supplied instruction manual and carefully follow the safety precautions.

When setting up the monitor, pay close attention to your surrounding environment and ensure that the temperature and humidity are within the specified specifications of that monitor. You will find these in the supplied manual. Once you have installed the monitor in the desired position, please follow the steps below to connect it:

1. Connect your monitor to a power source using the included power supply. The power supply connects to the DC12V input on the back of the monitor.
2. Connect your monitor to a video source with a video cable. This can be done with the HDMI, VGA, RCA or BNC inputs.
3. Turn on the video source and then the monitor.
   
   Each Beetronics monitor has different video connections (HDMI, VGA, RCA or BNC) and inputs. It is important that the video connection used and the selected input match. This can be done with the buttons on the back of the monitor or with the supplied remote control. By default, the screen is set to the HDMI channel.
    
4. To change the input on the remote, click on Input and cycle up or down to select the desired input.
5. Click OK on the remote to confirm your selection.

If the resolution and signal of the video source are supported, you have finished setting up the monitor. It is now ready for use.